One prosthetic connection
MAXIMUM PROSTHETIC FLEXIBILITY WITH ONLY ONE CONNECTION


With only one prothetic connection per implant line TRI® reduces the number of components to a minimum, optimizing the handling and storage requirements in the daily practice. Choose your optimal abutment with the TRI® Soft Tissue Concept, to achieve high-end esthetic results.

CONSISTENT EMERGE PROFILE
TRI® Prosthetic Kit


The TRI® prosthetic kit contains all the instrumentation for the restoring dentist to handle healing components and to place provisional and final restorations. The kit features the same grommet-less technology like the TRI® Surgical Kit, validated for automated cleaning in washer-disinfection machines. The workflow has been streamlined, and the improved versions of the prosthetic drivers are now also included in the prosthetic kit. An additional flexible compartment allows for storing and sterilization of any components for the individual needs of the restoring dentist.

Features grommet-less technology for validated manual and automated processing

Improved tool retention.

Contains all new prosthetic tools including the new prosthetic driver directly for the ratchet

Contains a stainless steel bowl for storage of various components

Soft Tissue Management
For long-term esthetic results

The soft-tissue interface of the TRI® Dental Implant System is unique and innovative at the same time. The continuous platform switch allows for a tight and secure tissue seal around the implant abutment connection. All prosthetic components integrate a consistent emergence profile - covering all components, from impression post and healing cap to the final abutment.

"An implant design concept that respects the highest hard and soft tissue parameters, as well as strict requirements for primary and secondary stability. All based on practical experience linked with the latest implant research." 

Marius Steigmann, DDS (Institute Steigmann, Neckargemünd, Germany)
Clinical Case
Dr. Marius Steigmann (Germany)
Components
Soft Tissue Management
TRI® 3D-Touch Impression
Open-Tray Impression Taking Reinvented.

The new TRI® 3D-Touch Impression combines simplicity with unique product features. It can be used as a conventional open-tray impression post as well as high precision titanium scan body, unified in one single product. The patented instrument-free handling technology helps to save time and provides easier access to limited inter-occlusal spaces. A versatile, time-saving and unparalleled impression taking experience. 

Instrument-free handling with ability for angulated loosening for limited occlusal space

One screw for two lengths

Defined breaking point (15Ncm)

Grip for better handling

Scanbody & impression post

No jamming, no control x-ray necessary

Retention for soft tissue impression and perfect esthetics

Digital.

The TRI® 3D-Touch Impression can be used as a conventional impression post as well as high precision titanium scan body, unified in one single product. 

Analog.

With the improved design, there is no risk of jamming and no control x-ray will be necessary. The retention will be significantly increased, also for the soft tissue impression and helps to achieve high esthetic results. 

Instrument-free.

The patented instrument-free handling technology helps to save time and with the ability for angulated loosening it provides easier access to limited inter-occlusal spaces. The handle can be used for further extension and with one screw two lengths are covered.

Tutorial by Dental Technician Holger Kast
Play
TRI® 2in1 Impression Abutment
INSTRUMENT-FREE HANDLING FOR CLOSED-TRAY IMPRESSION

The TRI® 2in1 Impression Abutment is a revolutionary instrument-free innovation for closed-tray impression taking and final abutment restorations. The patented integrated solution guarantees an entire new level of precision and simplicity during the impression and restorative process. And best of all: you get 2 products in 1!

Patented Instrument Free Handling
Fastest Impression procedure in industry
Integrated final contour abutment
Play
Play
Easy to use
Step 1

The TRI® 2in1 is easily inserted into the implant with the integrated torque handle piece. The handle is turned until it reaches the defined torque (15 Ncm) at the break point. 

Easy to use
Step 2

The situation is now ready for the direct impression taking, without painstakingly covering the screw channel with an additional plastic cap or similar items. The impression spoon is removed after the impression material has cured. The TRI® 2in1 can now easily be removed using the previously handle piece. For this purpose, the handle piece must be placed onto the TRI® 2in1 in reverse. 

Easy to use
Step 3

The TRI® 2in1 is then screwed to the implant analog. Thanks to the unique design, the TRI® 2in1 can be repositioned precisely and safely in the impression to produce the master model. The impression screw is exchanged with the occlusal screw and the TRI® 2in1 is now a final contour abutment with a conical profile and a defined cement margin. 


STEP BY STEP DOCUMENTATION
Andreas van Orten M.Sc. (Germany)

TRI® 2in1 Impression Abutment Clinical Case Step by Step Documentation presented by Andreas van Orten, MSC (Waldrop, Germany)

Play
Scan Bodies

For all Lines 
Available for all Implant Lines (Bone-Level, Narrow, Tissue-Level)

2 Options
Available for Implant and Abutment Level 

Components
Impression Taking
SCREW RETAINED OPTIONS
ALL-ON-TRI®
SUPERIOR DESIGN AND SIMPLICITY

The All-on-TRI® Solution provides a fast and reliable restoration for fully edentulous patients with limited bone with only four implants and the innovative TRI® angled screw-retained abutment. 

Multi-Unit Abutment
FEATURES & BENEFITS


All-on-TRI® treatment protocol
Immediate stability with a proven protocol in minimum bone volume

One size fits all
All existing impression posts, temporary and final components fit

Superior Design Features
Including TRI® Friction and TRI® Soft Tissue Concept

Supported by TRI®+ Digital Solutions
Plan, place and restore your ALL-ON-TRI® case via the TRI®+ interface with your preferred digital technology

MULTI UNIT TI-BASE
FEATURES & BENEFITS

Flexiblity

Can be used conventional and digital

Customizable
4 Heights Customizing Options

Easy
Optimized Design for CAD/CAM Ceramic Restorations

4 Customizing Options
TRI®-Base
PATENTED & CUSTOMIZABLE BONDING-BASE

The newly patented TRI®-Base is the first Ti-Base that can be customized in length and angulation,
both physically by the technician and virtually in the respective CAD Software. 

4 Customizing Options

Rough Turned Surface for Better Retention

Anodized Pink for Better Esthetics

Engaging And Non-Engagning

Components
Screw Retaining
CEMENT RETAINED OPTIONS
Contour Abutment
for Temporary or permanent treatment


Soft Tissue Management

Concave emergence profile

THINK PINK!
Pink anodized for better esthetic results

Customizable
Anatomically contoured cement-line

MILLING BLANK
CAD ABUTMENT

Superior Design Features
Including TRI® Friction and TRI® Soft Tissue Concept

Maximum Flexibility 
For full anatomic Abutment Design

Components
Cement Retained
TRI® Raptor
OVERDENTURE ATTACHMENT SYSTEM

The TRI® Raptor Abutment range is the newest line of low profile direct implant overdenture attachments. With a low vertical profile of 2.1 mm and diameter of 4.4 mm it is the smallest attachment system on the market. This system offers multiple solutions for overdenture treatment planning when vertical space limitations are a consideration. Female caps are retained by means of a stainless steel housing ranging in four levels of retention, making it easy to process at the dental laboratory or chairside in the dental office.

Flexibility

Lowest height and diameter

50° Degrees

Divergencies 

Best Value

For quality

Smartbox
Retentive caps housing

The new Smart Box is a retentive caps housing with innovative design.
Thanks to a pivoting mechanism with a rotational core, it allows a passive insertion under extreme conditions, also up to 50° divergency.

Metal to metal rotational core

Titanium housing with TIN coating

Titanium liner

Elastic cup

Clinical Case TRI® Raptor
Dr. Graham Meng (USA)
Play
Components
Overdenture
Would you like to discover more about the TRI® Prosthetic Components?
Book a 15 Minute online introduction with our Team.